From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. About: The fulfilment of all legal requirements during the development, production and use of vehicles is an important factor for companies to minimize costs and risks by finding a reasonable balance between the costs incurred to provide all required evidence and the risks that may arise from a deviation from these requirements. The knowledge imparted in this training goes beyond the knowledge of the basic CoP training and provides the participants (optionally adapted to the specific needs of the company) with knowledge about the subtleties of the legal requirements. The training is primarily aimed at experts from the fields of homologation, quality assurance and CoP. Interested parties from other fields are welcome. The training is almost the same as the "Basic Training Approval Procedures" and "Basic Training CoP", in order to make the start easier. The training comprises the following learning units- summary of CoP basic training- consolidation of CoP- Q and QM system- consolidation of CoP- P / product tests- consolidation of the legal requirements and differentiation from other production securing measures, as well as other legal requirements- evaluation / assessment of CoP tests in detail- measures in case of non-conformity in detail- summary of recalls and market surveillance- practical exercises and quizzes to consolidate the acquired knowledge- learning success control

Introduction: Auditors fulfil an important task in companies - they check and investigate whether applicable requirements are fulfilled. Thus, auditors are, so to speak, an internal self-control or, in the case of the so-called 2nd Party Audit, a check whether suppliers meet the contractually agreed requirements. Learn the basic knowledge of audit management according to DIN EN ISO 19011, which you need for the job as an internal or external auditor. Trainer competence: Several years of auditing experience with companies and their suppliers according to the most diverse catalogues of requirements distinguish our trainers for this seminar. Objective: Participants can safely plan and conduct audits. Content: o   Sense, goal and benefit of the audit for companies o   Audit principles o   Audit program according to DIN EN ISO 19011 o   Performance of an audit -       Clarification of the audit assignment and requirements -       Preparation of the audit -       Carrying out the on-site visit -       Interview technique in the audit -       Evidence in the audit -       Evaluation of non-conformities if requirements are not fulfilled -       Audit report -       Non-conformance Management o   Evaluation and further development of auditor competence o   Competence Check o   Optional: Certificate of participation according to DIN EN ISO/IEC 17024*. *The extra costs of 250 EUR per certificate of participation according to DIN EN ISO/IEC 17024 are not included in the seminar price Requirements: none Target group: Persons who are to plan and carry out audits in companies or at suppliers with confidence. Duration: 3 days Literature: Seminar documents   The price does not include travel cost such as hotel, flight etc. for the trainer. The cost for rooms and catering during the inhouse event will be carried by the client.

From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. About: Meeting all legal requirements during the development, production and use of vehicles is an important factor for companies to minimize costs and risks, and to find a reasonable balance between the costs of providing all required evidence and the risks that can arise from deviating from these requirements. As an employee of a vehicle manufacturer, the acquired knowledge will help you to understand your obligations, from product development to recycling, and to derive the right measures to minimize the risk of withdrawal/refusal of approval, import stops in certain markets or extensive recall actions. The training is aimed at employees of vehicle manufacturers and suppliers of the automotive industry who work in the field of homologation, certification, development or production/quality assurance. But also related departments such as logistics, marketing and ultimately the staff of inspection and testing laboratories, both internal and external manufacturers, can use the knowledge of legal requirements of their products and services to identify risks and determine a reasonable level of precautions (to ensure conformity of production) and evidence. The training comprises the following units of learning - summary of approval procedures - basics of CoP- QM- system - CoP-Q - product testing - CoP-P- quality certificates vs. CoP- certificates - examples of concrete CoP requirements - auditing - evaluation / assessment of CoP tests - measures in case of non-compliance - practical exercises and quizzes to consolidate the acquired knowledge - learning success control

From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. About: The compliance with all legal requirements during the development, production and use of vehicles is an important factor for companies to minimize costs and risks. It is important to find a reasonable balance between the costs that arise to provide all required proof and the risks that can arise from a deviation from these requirements. With the appropriate knowledge you understand how you as a supplier can meet the requirements of OEM and authorities and how you can fulfill the approval relevant requirements for your product during the development. As an employee of a vehicle manufacturer, the acquired knowledge will help you to understand your obligations, from product development to recycling, and to be able to derive the right measures to minimize the risk of withdrawal/refusal of approval, import stops in certain markets or extensive recall actions. This ensures that beginners as well as the "old hands" gain a high level of practical knowledge and a comprehensive understanding from the training, which is recommended not only for employees from homologation/certification, quality assurance, production and development. The training can also benefit sales or marketing staff in that the knowledge of the approval relevant requirements in different regions of the world helps to evaluate the follow-up costs. The training includes the following learning units: The development of a road traffic law Basic knowledge of legislation / legal framework regulation / framework directive Authorities and technical services for Europe Who are the economic actors in the approval procedure and related processes Who are the economic actors in the approval procedure and related processes? Overview national /European / international procedures Objectives of the authorization procedure and safeguard clause- Authorization procedure Practical exercises and quizzes to consolidate the acquired knowledge- Learning success control

From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. About: You have training needs regarding requirements relevant to approval and would like to refresh your existing knowledge and compare it with the development of legislation and its implementation in practice? But you do not find the contents relevant to you in the standard training courses? Talk to me! I can offer you a solution that fits like a good Italian tailor-made suit? My training program consists of approx. 100 individual modules with the respective focal points. Quiz questions, proven practical exercises and discussion points are also available. This pool as learning blocks allows me to put together the right training for you with little effort. Your advantage: your tailor-made suit fits! the lead time is only a few days - short-term appointments are possible! the price is identical to the standard training!

About: This offer supports you in conducting analysis to determine the need for internal training.   About the trainer: Our Expert, Thomas Junggeburth, has received his expertise during his worktime at the human resource department at a German Automobile Manufacturer in conduct analysis to determine needs for internal qualification programs.  

From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. Meeting all legal requirements during the development, production and use of vehicles is an important factor for companies to minimize costs and risks, and to find a reasonable balance between the costs of providing all required evidence and the risks that can arise from deviating from these requirements. As an employee of a vehicle manufacturer, the acquired knowledge will help you to understand your obligations, from product development to recycling, and to derive the right measures to minimize the risk of withdrawal/refusal of approval, import stops in certain markets or extensive recall actions. The training is aimed at employees of vehicle manufacturers and suppliers of the automotive industry who work in the field of homologation, certification, development or production/quality assurance. But also related departments such as logistics, marketing and ultimately the staff of inspection and testing laboratories, both internal and external manufacturers, can use the knowledge of legal requirements of their products and services to identify risks and determine a reasonable level of precautions (to ensure conformity of production) and evidence. The training comprises the following units of learning- summary of approval procedures- basics of CoP- QM- system - CoP-Q- product testing - CoP-P- quality certificates vs. CoP- certificates- examples of concrete CoP requirements- auditing- evaluation / assessment of CoP tests- measures in case of non-compliance- practical exercises and quizzes to consolidate the acquired knowledge- learning success control

From September 1st, 2020, the new framework regulation (EU) 2018/858 is mandatory for the approval of vehicle types and their equipment. Of course, all training courses from Mark Haacke Training & Consulting are based on the new requirements. The fulfilment of all legal requirements during the development, production and use of vehicles is an important factor for companies to minimize costs and risks by finding a reasonable balance between the costs incurred to provide all required evidence and the risks that may arise from a deviation from these requirements. The knowledge imparted in this training goes beyond the knowledge of the basic CoP training and provides the participants (optionally adapted to the specific needs of the company) with knowledge about the subtleties of the legal requirements. The training is primarily aimed at experts from the fields of homologation, quality assurance and CoP. Interested parties from other fields are welcome. The training is almost the same as the "Basic Training Approval Procedures" and "Basic Training CoP", in order to make the start easier. The training comprises the following learning units - summary of CoP basic training - consolidation of CoP- Q and QM system - consolidation of CoP- P / product tests - consolidation of the legal requirements and differentiation from other production securing measures, as well as other legal requirements - evaluation / assessment of CoP tests in detail - measures in case of non-conformity in detail - summary of recalls and market surveillance - practical exercises and quizzes to consolidate the acquired knowledge - learning success control

Are you facing a major restructuring? Are you looking for ways to fundamentally improve yourself and your company?We as external consultants offer a new and fresh perspective directly out of a Start-Up Environment!   Taliox Who are we? We are a successful start-up from Hamburg that offers a variety of services in the field of information technology. Taliox was founded in 2016 by four IT specialists and has since been helping its customers to benefit from innovative and state-of-the-art technologies. As today's digital natives, our team can deliver innovative software solutions by combining an intrinsic technical understanding with the latest research. As an innovative digitizer, we optimize processes, design digital strategies, and carry out feasibility studies. We realize our customers' ideas, whether it is a web or desktop application, an app, or a website. Furthermore, with a platform for advanced digital quality planning and an Audit Assistant, we have a constantly expanding product portfolio.   Industry sectorsIT consulting, automotive, consumer goods, software development Areas of applicationproject management, process management, strategy development, concept development, team management, IT security, digitization, software development, performance optimization ProductWe provide organizational consulting, develop information strategies for your company, carry out feasibility studies and calculate the solution costs.With the aim of solving the actual problems directly! Building up on our consulting methods from Problem-Solving and Consulting I we will build a first solution for your problem in this process and test its suitability for you.  We will concentrate on the first three steps of our methodological consulting, based on our experience, will adapt to your needs in this process.  Methods IDEATE  PROTOTYPE TEST Our way of working is divided into three activities according to our consulting work. In the first step, the information shared with us is used to generate and evaluate different ideas based on your challenges. We then switch to prototyping mode after detailed elaboration to create prototypes that will be used for evaluation.The prototype can be very versatile and depends on your ideas. This can range from a web or desktop application, a website to an app! Finally, the prototype that has now been built is used to generate actual user feedback.Instead of working at the concept level, this format is more of a practical type to generate results that might as well be used in future project phases. Companies with whom we can work can break down stuck thinking patterns with our help and make the best future-oriented decisions in intensive cooperation with us. Our working concept effectively structures our cooperation with the aim of your maximum success