Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, in the respective countries and regions current legal statutes on product integrity must be observed, also the justifiable safety expectations of the general public must be fulfilled. With products conspicuously “unsafe“ in the market, or whose conformity to legal requirements is questionable, those responsible are obliged to initiate the necessary actions.In order to be aware of and to understand the many demands addressed to a product safety representative, comprehensive information and qualification is necessary. This is the aim of this two-day qualification: it is specifically geared to the requirements in the participants’ daily work practice. The central topics of product integrity are explored, and the competence as product safety representative is developed in the scope of these five modules.   Objectives The focus is on the communication of expert knowledge that enables the participants to handle their everyday work more professionally and in a more targeted fashion as prospective or existing product safety representatives. The responsibilities in the whole supply chain from development through manufacture and use up to the end of intended use are dealt with.After an introduction to the topic the organization of product integrity, product integrity in the product life cycle, guidance for product nonconformities and examples for tools and methods are discussed. Concept and Methods During this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work practice with a particular focus on exchanging experiences between participants and the trainer. Prerequisites for participation In order to attend this training, a technical and / or business education is necessary as well as experience in automotive quality management, especially in complaints and recourse management. Furthermore, the participants should be qualified and experienced in the evaluation of technical product and process risks (e. g., FMEA facilitator, VDA 6.3 process auditor, designer / developer) and be knowledgeable about the use of the organisation’s products, the state of the art as well as the requirements from relevant laws and customer requirements. Target audience Automotive executives and personnel who are to be deployed as product safety representatives or who already hold that position. Qualification Certificate After passing the test, the participants will receive a certificate of qualification. Duration 2 days Supplementary Material VDA Volume Product Integrity and Conformity

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, in the respective countries and regions current legal statutes on product integrity must be observed, also the justifiable safety expectations of the general public must be fulfilled. With products conspicuously “unsafe“ in the market, or whose conformity to legal requirements is questionable, those responsible are obliged to initiate the necessary actions. In order to be aware of and to understand the many demands addressed to a product safety representative, comprehensive information and qualification is necessary. This is the aim of this two-day qualification: it is specifically geared to the requirements in the participants’ daily work practice. The central topics of product integrity are explored, and the competence as product safety representative is developed in the scope of these five modules.   ObjectivesThe focus is on the communication of expert knowledge that enables the participants to handle their everyday work more professionally and in a more targeted fashion as prospective or existing product safety representatives. The responsibilities in the whole supply chain from development through manufacture and use up to the end of intended use are dealt with. After an introduction to the topic the organization of product integrity, product integrity in the product life cycle, guidance for product nonconformities and examples for tools and methods are discussed. Concept and MethodsDuring this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work practice with a particular focus on exchanging experiences between participants and the trainer. Prerequisites for participationIn order to attend this training, a technical and / or business education is necessary as well as experience in automotive quality management, especially in complaints and recourse management. Furthermore, the participants should be qualified and experienced in the evaluation of technical product and process risks (e. g., FMEA facilitator, VDA 6.3 process auditor, designer / developer) and be knowledgeable about the use of the organisation’s products, the state of the art as well as the requirements from relevant laws and customer requirements. Target audienceAutomotive executives and personnel who are to be deployed as product safety representatives or who already hold that position. Qualification CertificateAfter passing the test, the participants will receive a certificate of qualification. Duration2 days Supplementary MaterialVDA Volume Product Integrity and Conformity

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, the current legal statuses of product integrity applicable in the respective countries and regions must be observed, also the justifiable safety expectations of the general public. If obviously unsafe products or products whose conformity to legal requirements is questionable are on the market, those who are responsible shall be obliged to take the necessary actions.These manifold tasks which product safety representative has to deal with are subject to constant change. In order to identify the challenges and implement them in one’s own organization, it is thus necessary to renew and deepen existing knowledge. This is the aim of this one-day upgrade qualification: It is specifically geared to the requirements in the participants’ daily practice. The newest insights into product integrity are explored in four modules, and the competence as product safety representative is developed.   Objectives The focus is on teaching product safety representatives expert and state of the art knowledge. This strengthens their competence to master their everyday work. Responsibilities throughout the complete supply chain from design and development over manufacture and use all the way to the termination of intended use are also considered.Particularly, the topics organization of product integrity, product integrity in the product lifecycle, guidance for product nonconformities and examples for tools and methods are dealt are dealt with in particular. Concept and Methods During this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work environment with a particular focus on exchanging experiences between participants and the trainer Prerequisites for participation Participants must have attended a product safety representative training within the past two years and also possess knowledge in automotive quality management. Target audience This training addresses product safety representatives from organizations that are part of the automotive supply chain. Qualification Certificate After passing the test, the participants will receive a certificate of qualification. Supplementary Material VDA Volume Product Integrity and Conformity

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, the current legal statuses of product integrity applicable in the respective countries and regions must be observed, also the justifiable safety expectations of the general public. If obviously unsafe products or products whose conformity to legal requirements is questionable are on the market, those who are responsible shall be obliged to take the necessary actions.These manifold tasks which product safety representative has to deal with are subject to constant change. In order to identify the challenges and implement them in one’s own organisation, it is thus necessary to renew and deepen existing knowledge. This is the aim of this one-day upgrade qualification: It is specifically geared to the requirements in the participants’ daily practice. The newest insights into product integrity are explored in four modules, and the competence as product safety representative is developed.   Objectives The focus is on teaching product safety representatives expert and state of the art knowledge. This strengthens their competence to master their everyday work. Responsibilities throughout the complete supply chain from design and development over manufacture and use all the way to the termination of intended use are also considered.Particularly, the topics organization of product integrity, product integrity in the product lifecycle, guidance for product nonconformities and examples for tools and methods are dealt are dealt with in particular. Concept and Methods During this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work environment with a particular focus on exchanging experiences between participants and the trainer Prerequisites for participation Participants must have attended a product safety representative training within the past two years and also possess knowledge in automotive quality management. Target audience This training addresses product safety representatives from organisations that are part of the automotive supply chain. Qualification Certificate After passing the test, the participants will receive a certificate of qualification. Supplementary Material VDA Volume Product Integrity and Conformity

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, the current legal statuses of product integrity applicable in the respective countries and regions must be observed, also the justifiable safety expectations of the general public. If obviously unsafe products or products whose conformity to legal requirements is questionable are on the market, those who are responsible shall be obliged to take the necessary actions. These manifold tasks which product safety representative has to deal with are subject to constant change. In order to identify the challenges and implement them in one’s own organization, it is thus necessary to renew and deepen existing knowledge. This is the aim of this one-day upgrade qualification: It is specifically geared to the requirements in the participants’ daily practice. The newest insights into product integrity are explored in four modules, and the competence as product safety representative is developed.   ObjectivesThe focus is on teaching product safety representatives expert and state of the art knowledge. This strengthens their competence to master their everyday work. Responsibilities throughout the complete supply chain from design and development over manufacture and use all the way to the termination of intended use are also considered. Particularly, the topics organization of product integrity, product integrity in the product lifecycle, guidance for product nonconformities and examples for tools and methods are dealt are dealt with in particular. Concept and MethodsDuring this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work environment with a particular focus on exchanging experiences between participants and the trainer Prerequisites for participationParticipants must have attended a product safety representative training within the past two years and also possess knowledge in automotive quality management. Target audienceThis training addresses product safety representatives from organizations that are part of the automotive supply chain. Qualification CertificateAfter passing the test, the participants will receive a certificate of qualification. Supplementary MaterialVDA Volume Product Integrity and Conformity

Ab 01.09.2020 ist die neue Rahmenverordnung (EU) 2018/858 verpflichtend für die Genehmigung von Fahrzeugtypen und deren Ausrüstungsgegenständen. Selbstverständlich haben alle Schulungen von Mark Haacke Training & Consulting die neuen Anforderungen als Grundlage. Die Schulung fast die wesentlichen Schwerpunkte der Grundlagen der Genehmigungsverfahren und Übereinstimmung der Produktion zusammen und stellt diese entsprechend fokussiert für die Entscheider in den Unternehmen zusammen. Durch die Schulung führt Mark Haacke, der auf fast 20 Jahre praktische Erfahrungen in diesem komplexen Themengebiet zurück greifen kann. Halten Sie sich nicht mit dem Lesen von Gesetzestexten und Verordnungen oder Richtlinien auf! Befassen Sie sich direkt mit den daraus abzuleitenden Handlungen! Mark Haacke führt Sie locker, redegewandt und praxisnah durch die einzelnen Elemente der Schulung und gibt Ihnen ausreichend Raum für Diskussionen und Fragen. Ziel der Schulung ist es dem Management der Unternehmen bei der optimalen Umsetzung der Pflichten, bei klarer Kenntnis der Rechte, zu unterstützen und etwaige Maßnahmen in der Organisation definieren zu können.

Die Erfüllung aller gesetzlichen Vorgaben im Laufe der Entwicklung, Produktion und der Nutzung von Fahrzeugen ist für die Unternehmen ein wichtiger Faktor, um Kosten und Risiken zu minimieren. Hierbei gilt es eine sinnvolle Balance zu finden, zwischen den Kosten die entstehen, um alle geforderten Nachweise zu erbringen und den Risiken die durch eine Abweichung von diesen Forderungen entstehen können. Mit dem entsprechenden Wissen verstehen Sie, wie Sie als Lieferant die Anforderungen von OEM und Behörden erfüllen, wer mit dem OEM oder den Behörden kommunizieren darf und/oder muss und welche Maßnahmen zur Feld- und Produktbeobachtung getroffen werden können. Als Mitarbeiter eines Fahrzeugherstellers hilft Ihnen das erlernte Wissen Ihre Pflichten und Rechte hinsichtlich Marktüberwachung zu kennen. Lernen Sie das Steuern von Rückrufen kennen und welche Methoden und Kriterien zur Entscheidungsfindung genutzt werden können.   Die Schulung umfasst folgende Lerneinheiten - Zusammenfassung CoP und Genehmigungsverfahren- Von Marktüberwachung betroffene Produktgruppen- Maßnahmen zur aktiven und passiven Marktüberwachung- Stufen von Rückrufen- Entscheidungsmatrix- Organisation und Gremien in den Unternehmen- Praktische Übungen und Quizfragen zur Festigung des erlangten Wissens- Lernerfolgskontrolle

Die Erfüllung aller gesetzlichen Vorgaben im Laufe der Entwicklung, Produktion und der Nutzung von Fahrzeugen ist für die Unternehmen ein wichtiger Faktor, um Kosten und Risiken zu minimieren. Hierbei gilt es eine sinnvolle Balance zu finden, zwischen den Kosten die entstehen, um alle geforderten Nachweise zu erbringen und den Risiken die durch eine Abweichung von diesen Forderungen entstehen können. Mit dem entsprechenden Wissen verstehen Sie, wie Sie als Lieferant die Anforderungen von OEM und Behörden erfüllen, wer mit dem OEM oder den Behörden kommunizieren darf und/oder muss und welche Maßnahmen zur Feld- und Produktbeobachtung getroffen werden können. Als Mitarbeiter eines Fahrzeugherstellers hilft Ihnen das erlernte Wissen Ihre Pflichten und Rechte hinsichtlich Marktüberwachung zu kennen. Lernen Sie das Steuern von Rückrufen kennen und welche Methoden und Kriterien zur Entscheidungsfindung genutzt werden können.  

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, in the respective countries and regions current legal statutes on product integrity must be observed, also the justifiable safety expectations of the general public must be fulfilled. With products conspicuously “unsafe“ in the market, or whose conformity to legal requirements is questionable, those responsible are obliged to initiate the necessary actions. In order to be aware of and to understand the many demands addressed to a product safety representative, comprehensive information and qualification is necessary. This is the aim of this two-day qualification: it is specifically geared to the requirements in the participants’ daily work practice. The central topics of product integrity are explored, and the competence as product safety representative is developed in the scope of these five modules.   ObjectivesThe focus is on the communication of expert knowledge that enables the participants to handle their everyday work more professionally and in a more targeted fashion as prospective or existing product safety representatives. The responsibilities in the whole supply chain from development through manufacture and use up to the end of intended use are dealt with. After an introduction to the topic the organization of product integrity, product integrity in the product life cycle, guidance for product nonconformities and examples for tools and methods are discussed. Concept and MethodsDuring this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work practice with a particular focus on exchanging experiences between participants and the trainer. Prerequisites for participationIn order to attend this training, a technical and / or business education is necessary as well as experience in automotive quality management, especially in complaints and recourse management. Furthermore, the participants should be qualified and experienced in the evaluation of technical product and process risks (e. g., FMEA facilitator, VDA 6.3 process auditor, designer / developer) and be knowledgeable about the use of the organisation’s products, the state of the art as well as the requirements from relevant laws and customer requirements. Target audienceAutomotive executives and personnel who are to be deployed as product safety representatives or who already hold that position. Qualification CertificateAfter passing the test, the participants will receive a certificate of qualification. Duration2 days Supplementary MaterialVDA Volume Product Integrity and Conformity