The COVID‑19 pandemic, also known as the coronavirus pandemic, is an ongoing global pandemic. It has impacted the life of millions to an unimaginable extend. In addition to that, businesses worldwide has been impacted as well for several months. In recent week, some countries are experiencing significant improvement in their respective countries hence businesses are beginning to operate as normal. However borders in South East Asia remain closed to foreigners limiting the possibilities to carry out our certain business task as per normal.   German Automotive Business (GAB Corporation) would like to support your business by offering our services. We have high skilled auditors in the automotive industry with many years of experience to carry out VDA6.3 Process Audits, Customer Specific Requirement (CSR Audits), verify corrective actions/counter measures, follow up on previous audit activities and monitor quality incidents on-site on your behalf. Our staff is located across South East Asia and is able to immediately support your needs as stated above. Prior to carrying out the needed task, our team will hold a conference call with the requestor to align on the requirements to ensure that the objectives are met at the end of the task. We are able to customize the requirements of our clients as per request.   Please contact us at asia@gab-corporation.com for more information.  

The COVID‑19 pandemic, also known as the coronavirus pandemic, is an ongoing global pandemic. It has impacted the life of millions to an unimaginable extend. In addition to that, businesses worldwide has been impacted as well for several months. In recent week, some countries are experiencing significant improvement in their respective countries hence businesses are beginning to operate as normal. However borders in South East Asia remain closed to foreigners limiting the possibilities to carry out our certain business task as per normal.   German Automotive Business (GAB Corporation) would like to support your business by offering our services. We have high skilled auditors in the automotive industry with many years of experience to carry out VDA6.3 Process Audits, Customer Specific Requirement (CSR Audits), verify corrective actions/counter measures, follow up on previous audit activities and monitor quality incidents on-site on your behalf. Our staff is located across South East Asia and is able to immediately support your needs as stated above. Prior to carrying out the needed task, our team will hold a conference call with the requestor to align on the requirements to ensure that the objectives are met at the end of the task. We are able to customize the requirements of our clients as per request.   Please contact us at asia@gab-corporation.com for more information.  

Are you facing a major restructuring? Are you looking for ways to fundamentally improve yourself and your company?We as external consultants offer a new and fresh perspective directly out of a Start-Up Environment!   Taliox Who are we? We are a successful start-up from Hamburg that offers a variety of services in the field of information technology. Taliox was founded in 2016 by four IT specialists and has since been helping its customers to benefit from innovative and state-of-the-art technologies. As today's digital natives, our team can deliver innovative software solutions by combining an intrinsic technical understanding with the latest research. As an innovative digitizer, we optimize processes, design digital strategies, and carry out feasibility studies. We realize our customers' ideas, whether it is a web or desktop application, an app, or a website. Furthermore, with a platform for advanced digital quality planning and an Audit Assistant, we have a constantly expanding product portfolio.   Industry sectorsIT consulting, automotive, consumer goods, software development Areas of applicationproject management, process management, strategy development, concept development, team management, IT security, digitization, software development, performance optimization ProductWe provide organizational consulting, develop information strategies for your company, carry out feasibility studies and calculate the solution costs.With the aim of solving the actual problems directly! Building up on our consulting methods from Problem-Solving and Consulting I we will build a first solution for your problem in this process and test its suitability for you.  We will concentrate on the first three steps of our methodological consulting, based on our experience, will adapt to your needs in this process.  Methods IDEATE  PROTOTYPE TEST Our way of working is divided into three activities according to our consulting work. In the first step, the information shared with us is used to generate and evaluate different ideas based on your challenges. We then switch to prototyping mode after detailed elaboration to create prototypes that will be used for evaluation.The prototype can be very versatile and depends on your ideas. This can range from a web or desktop application, a website to an app! Finally, the prototype that has now been built is used to generate actual user feedback.Instead of working at the concept level, this format is more of a practical type to generate results that might as well be used in future project phases. Companies with whom we can work can break down stuck thinking patterns with our help and make the best future-oriented decisions in intensive cooperation with us. Our working concept effectively structures our cooperation with the aim of your maximum success

Einführung: Das Thema Informationssicherheit hat in den letzten Jahren eine immer stärkere Bedeutung bekommen, u.a. auch in der Automobilindustrie. Ergeben sich durch das digitale Zeitalter viele Vorteile, werden Unternehmen andererseits deutlich anfälliger für interne und externe Bedrohungen, die diese Informationssicherheit gefährden. Hier setzt der TISAX-Standard an, der Sie und Ihre Organisation sicher ins digitale Zeitalter bringt!   Ziel: Mit diesem Foundation-Training erhalten Sie einen guten Überblick über den TISAX-Standard. Sie sind in der Lage, die sog. „Controls“ zu lesen und zu verstehen. Somit können Sie das Thema TISAX in Ihrem Unternehmen endlich angehen und von unserer Erfahrung profitieren!   Inhalt: o    Entwicklung und Hintergrund von TISAX o    Grundlagen eines Informationssicherheitsmanagementsystem (ISMS) o    Fragenkatalog VDA ISA (Information Security Assessment) o    Die Rolle des Informationssicherheitsbeauftragten (ISB) o    Voraussetzungen einer TISAX-Prüfung  o    Ablauf einer TISAX-Prüfung     Voraussetzungen:    Keine. Werden Sie als Informationssicherheitsbeauftragter bestellt, empfehlen wir Ihnen zusätzlich unser Training „Qualifikation zum ISB (Informationssicherheitsbeauftragter) nach TISAX® / VDA“.     Zielgruppe: All diejenigen, die Teil eines TISAX-Projektes sind bzw. werden. Klassischerweise zählen dazu Mitarbeiter aus den Bereichen: IT, Personalwesen, Facility Management. Doch auch Vorgesetzte mit Personalverantwortung können sich einen guten Überblick über den TISAX-Prozess verschaffen.     Dauer: 2 Tage   Literatur: Seminarunterlagen   Preis: 649,00 EUR pro Teilnehmer

FMEA – Basic Training Harmonised AIAG-VDA FMEA Suppliers delivering their product to European and North American manufacturers (OEM) are obliged to evaluate the FMEA, based on the VDA and AIAG FMEA manuals. Occasionally, this has led to an increase in the complexity of product development and improvement for suppliers. Joint requirements and expectations for FMEA now enable suppliers to design a coherent process for FMEA that meets the needs and expectations of their respective customers. Concept and Methods Before the workshop, an online quiz, for which some excerpts from the FMEA manual are provided, determines the participants’ level of knowledge. Then follows the classroom workshop with integrated individual tasks and group exercises, supported by the instructor’s special expertise. Eight weeks later, there is a final webinar in which the participants communicate with each other, exchange experiences and can ask questions. Aim The objective of this workshop is to teach the basics of FMEA and to give practical tips for application. Prerequisites for participation There are no prerequisites for attending this training. Target audience Beginners and prospective users of this method from product and process development, testing, logistics, manufacturing, inspection planning, maintenance and quality. Qualification Certificate After passing the test, the participants will receive a certificate of qualification. Duration 2 days Literature AIAG & VDA FMEA manual

Every organization within the automotive supply chain is obliged to ensure the safety and conformity of its products. To this end, in the respective countries and regions current legal statutes on product integrity must be observed, also the justifiable safety expectations of the general public must be fulfilled. With products conspicuously “unsafe“ in the market, or whose conformity to legal requirements is questionable, those responsible are obliged to initiate the necessary actions. In order to be aware of and to understand the many demands addressed to a product safety representative, comprehensive information and qualification is necessary. This is the aim of this two-day qualification: it is specifically geared to the requirements in the participants’ daily work practice. The central topics of product integrity are explored, and the competence as product safety representative is developed in the scope of these five modules.   ObjectivesThe focus is on the communication of expert knowledge that enables the participants to handle their everyday work more professionally and in a more targeted fashion as prospective or existing product safety representatives. The responsibilities in the whole supply chain from development through manufacture and use up to the end of intended use are dealt with. After an introduction to the topic the organization of product integrity, product integrity in the product life cycle, guidance for product nonconformities and examples for tools and methods are discussed. Concept and MethodsDuring this training, technical lectures and exercises alternate in order to support the transfer of the topics into the participants‘ own work practice with a particular focus on exchanging experiences between participants and the trainer. Prerequisites for participationIn order to attend this training, a technical and / or business education is necessary as well as experience in automotive quality management, especially in complaints and recourse management. Furthermore, the participants should be qualified and experienced in the evaluation of technical product and process risks (e. g., FMEA facilitator, VDA 6.3 process auditor, designer / developer) and be knowledgeable about the use of the organisation’s products, the state of the art as well as the requirements from relevant laws and customer requirements. Target audienceAutomotive executives and personnel who are to be deployed as product safety representatives or who already hold that position. Qualification CertificateAfter passing the test, the participants will receive a certificate of qualification. Duration2 days Supplementary MaterialVDA Volume Product Integrity and Conformity

The objective of the standard is the sustainable improvement of start-up, delivery and field quality of all supplier parts, components and systems through process-accompanying assurance of product maturity at the start of production. By applying a standardized method,projects are segmented, assessed early on and corrected.This system for maturity level assurance describes a standard concept for cooperation and communication in complex product development projects with many parties involved in the supply chain. Therefore, it provides a standard set of measured values and criteria with the corresponding methodology. Since planned comprehensive use of the standard in the automotive and supplier industries requires knowledge and competence in different functions of the organization, a correspondingly broad scope and two-day course was designed.   Content The course imparts knowledge about maturity level methods (assessment, content, control and report systematics) that are necessary in maturity level regulatory processes in the product development process.Furthermore, the measurement criteria are worked out in detail in workshop mode. Finally, the content is applied in practice during a group exercise at an “interdisciplinary round table”. Initial situation and history Methods and basic principles of maturity level assurance Positive and negative examples from organizations Typical conflict of interests Role of the participants at the round table Opportunities for cooperation Group work Prerequisites for participation Experience in project work / product engineering process and / or parts/components qualification Target audience QA personnel, product managers, project managers in product development, product planners, leaders/spokespersons of cross-functional and cross-organizational development teams, persons responsible for components, the supplier’s customer team and project leaders, key account managers. Qualification Certificate At the end, you will receive a VDA certificate of qualification. Duration 2 days Literature VDA volume Maturity Level Assurance for New Parts

Moderation von FMEA Projekten (Design- oder Prozess FMEA nach AIAG/VDA Harmonisiert) Im Rahmen der Erstellung von Design- oder Prozess FMEA nach AIAG/VDA harmonisiertem Standard ist der Einsatz eines Moderators, der unabhängig von eigene Ergebnisinteressen die ausführende Gruppe durch den FMEA Prozess leitet unabdingbar. Gerade hier bietet sich die Verwendung eines Experten mit hoher Erfahrung und Kompetenz an, damit sich die Fachexperten des Unternahmen auf die wesentlichen Sachverhalte konzentrieren können und sich nicht in der Methodik verlieren.   Ziel: Pragmatische und effiziente Erstellung einer FMEA mithilfe eines externen Moderators   Inhalt   Alle Aufgaben und der notwendige Umfang werden vor Abgabe des Angebotes mit Ihnen abgestimmt und festgelegt. Sie erhalten auf Basis des Richtpreises ein abschließendes Angebot durch uns, wenn wir alle Inhalte mit Ihnen geklärt haben. Übliche Schritte: -        Diskussion mit dem Projektleiter -        Vorbereitung und Planung des FMEA Umfanges -        Unterstützung bei der Systemanalyse -        Unterstützung und Moderation bei der Funktionsanalyse und Risikoanalyse -        Unterstützung und Moderation bei der Bewertung und Optimierung -        Dokumentation in APIS IQ FMEA Wichtig: Der Anbieter bietet die Moderation des Prozesses an, er wird die FMEA nicht erstellen ohne die Mitwirkung der unternehmenseigenen Fachbereiche.    Der Anbieter:   MDQM ist ein freiberufliches Ingenieurbüro mit Markus Dönni als Inhaber. Markus Dönni arbeitet seit 25 Jahren im QM der Automobilindustrie und betreibt das Ingenieurbüro seit 2003. In über 400 Audits hat er weltweit Erfahrungen sammeln können sowohl bei der Auditierung innerhalb von Organisation als auch bei deren Lieferanten. Als zertifizierter AQMA Auditor nach ISO9001, IATF 16949 1st/2nd party Auditor, und zertifizierter VDA 6.3 3rd party Auditor deckt er das gesamte QM Auditspektrum ab.   Die FMEA Methodik lernte er bereits 1990 bei seiner QM Aufgabe in der Zentrale eines deutschen OEM kennen. Seit 1998 wendete er die FMEA Methodik bei diversen eigene Projekten als QS Leiter eines Lieferanten an und seit 2003 ist er Trainer und Moderator für FEAM in diversen Projekten. Hierbei reicht das Spektrum von einfachen Fertigungsprozessen wie Handling Geräten in der Montage bis hin zu Batteriezellfertigung und chemischen Herstellprozessen.

Background and Topics In order to ensure a high quality of the audit activities in the companies and the entire supply chain, auditors need to have the appropriate competence in relation to the respective methods. The IATF 16949 clearly emphasizes this requirement for the competence of the auditors. The effcient approach during the audits is an important success factor. This training deals with typical audit situations along the Automotive Core Tools. Target Audience This two-day training course is aimed at qualifed VDA 6.3 process auditors who wish to apply for an extension, as well as prospective VDA 6.3 Process and IATF System auditors who are seeking qualifcation. Objectives The participants strengthen their technical competence and deepen their knowledge on the basis of typical auditing situations in the context of quality methods, focusing on an effcient approach. Both the assessment of the technically correct application of the respective methods and the case-specifc assessment of typical situations are a central component of the training. Concept and Methods During the training, the technical input on the single Core Tools (RGA / APQP, VDA 2 / PPAP, FMEA, VDA 5 / MSA, Cmk / PpK/ CpK / SPC and 8D) will alternate with work tasks, single and group work exercises on typical examples. The main focus is on the quality methods that are crucial for the German automotive industry. Priority is given to the practical application by the participants. Prerequisites for Attendance Participation in this training requires good knowledge of the Automotive Core Tools. Participants can see which tools are included in the training in the following list of quality methods. In preparation for the training, it is recommended to refresh the expertise with appropriate sources, if necessary: Method list:                                                                                     Advanced Quality Planning /Product Development Process (Source:  VDA Volume Maturity Level Assurance for New Parts (MLA)) Failure Mode and Effects Analysis (FMEA) and Special Characterisitcs (Source:  AIAG & VDA FMEA Handbook and VDA Volume Special Characteristics ) Statistical evaluation of measuring systems (MSA) (Source: VDA Volume 5 – Capability of Measurement Systems) Statistical Process Control (SPC) (Source: VDA Volume 4 - Economical Process Design and Process Control ) Sample processing methods (Source: VDA Volume 2 – Production Process and Product Approval (PPF) ) Control plan  (Source: IATF 16949)                                                       Problem-solving techniques   (Source: VDA Volume 8D – Problem Solving in 8 Disciplines )   Certifcate of Qualifcation After passing the test, the participants will receive a certifcateof qualifcation Duration 2 days